Just got this machine. I've followed the instructions, but cannot complete the instructions to enable the Auto Release. I am able to complete Step 1. When I go to Step 2, when I touch the Sanitize button nothing happens, as in the Clean Indicator doesn't flash.
Just to see what would happen, I touched the Heated Dry button (while the Rinse Refill and Clean Indicators are flashing) and the Rinse Refill light does flash. I don't know what that means. FYI, I've touched the Sanitize button both while the Rinse Refill and Clean Indicators are flashing, and after they stop and in neither case does the Clean Indicator flash.
What am I missing? Or is that function not available on this model. And, what does the Rinse Refill Indicator flashing mean when I hit the Heated Dry button? I've pasted the instructions below:
Auto Release™ Dry (For applicable models)
The Auto Release™ Dry function, which is designed to improve drying performance, automatically
opens the dishwasher's door 1 to 15 minutes before a cycle ends.
You can enable or disable Auto Release™ Dry using the Setting Mode as described starting below.
Step 1. Entering the Setting mode
1. Turn the dishwasher on.
2. Press and hold the AUTO cycle button for five seconds within 60 seconds
from turning on the dishwasher.
- When you entered the Setting mode,
the Rinse Refill and Clean Indicators will flash.
Step 2. Auto Release™ On/Off
1. Press the Sanitize button to select the Auto Release™ Dry function
setting mode. The Clean Indicator is flashing.
2. Press the AUTO cycle button to change the setting.
