My Samsung top load wash machine model WA45T3200AW has an issue with spinning and throws code ub. The drum bangs against the side on the spin cycle and it keeps adding water to balance the load and never finishes spinning. This only happens on medium to large load with towels jeans etc itās fine with a smaller load of tops and little items. We replaced the suspension rods and no luck. I am wanting to try to calibrate it but I donāt have a delay end button. Does anyone know how to calibrate this machine? Or have any other idea of what could be wrong? Thank you
This is what it says on Page 27 of the owners manual
STEP 7 Run calibration (recommended) Calibration ensures accurate weight detection by the washer. Make sure the tub is empty before running calibration. 1. Press Power to turn on the washer. 2. Press and hold Temp. and Soil simultaneously for 3 seconds. 3. Press Start/Pause to start calibration. 4. The tub rotates clockwise for approximately 2 minutes. 5. When complete, ā0ā appears on the display, and the washer turns off automatically. NOTE Run Calibration Mode periodically for more accurate weight detection.
If you've found my post to be helpful, Please like my Comments āāā. If my response resolved your issue, please press the Like and āāā to Accept as Solution button.
If you've found my post to be helpful, Please like my Comments āāā. If my response resolved your issue, please press the Like and āāā to Accept as Solution button.
